This item is a must if you want to remotely control flash when you take shots.
Wireless flash receiver, works within area of 100 square meters( without interference).
Supports flash mode: ETT, M, MULTI.
Supports remote shutter release function and test flash.
Supports single contact flash triggering.
Has PC output interface and allow to upgrade item online.
LCD display indicates icon of flash mode, flash output power, ID and so on for ease of operation.
Comes with a cable and an adapter plug to match your need better.
Function of each part:
Mounting foot: Fix on the fixed stand.
PC port: Connect the flash as output.
USB upgrade interface: Connect the computer for firmware upgrade.
Test/ Shutter button: Half press and short press for flash test; long press for remote shutter.
Radio transmission confirmation light (LINK): Shows green if it’s connected to master unit or shows red if not.
Hot shoe: Install the flash.
Battery compartment: Install 2 AA batteries.
Power switch: ON / OFF.
LCD display: Indicate icon of flash mode, flash output power, ID, channel, grouping, battery, etc..
[Set] Setup button: Choose parameters.
[+]&[-] button: Change parameters.
Compatible transmitter(master unit): YN-E3-RT/YN600EX-RT/ST-E3-RT/600EX-RT
Parts of the compatible E-TTL flash list:
Canon EX(RT) / 580 EXⅡ/ 430 EXⅡ
Yongnuo YN568EX(Ⅱ)/ YN565C / YN468C(Ⅱ)/ YN467C(Ⅱ)/ YN465C
(The items mentioned above are for references only.)
Distance: 100m (without interference)
Channel: Auto, channel 1-15
Group: 5 groups (A/B/C/D/E)
Wireless ID: 0000-9999
USB firmware upgrade: Support
Battery: 2 * AA (support 1.2V rechargeable batteries) (not included)
Working time: 24 hours
Product size: 9 * 5 * 2.5cm / 3.5 * 2 * 1in
Product weight: 73g / 2.6oz
Package size: 10 * 8 * 6.5cm / 3.9 * 3.1 * 2.5in
Package weight: 152g / 5.4oz
This item includes receiver, cable and adapter plug only. Other items showed in the picture are not included.
1 * Receiver
1 * Cable
1 * Adapter Plug